#TURN OFF ADAPTIVE SOUND CONTROL UPDATE#

Turn “Adaptive Sound Control” OFF (if this setting is ON).

Launch the “SONY | Headphones Connect” App on your smartphone after connecting your headphones with your smartphone via Bluetooth.

How can I change Adaptive Sound Control to set Noise Cancelling levels to the maximum? On the other hand, the N/C level is therefore automatically reduced. Try changing the settings using the following method to hear the original noise-cancelling performance. That means that Ambient Sound is set to ON, letting through a decent level of environmental sounds. The default setting for Ambient Sound Control is “Ambient Sound level 20”, but avoids “Noise Cancelling”. Although these modes are predefined, you can customise them!įor example, let’s have a look at the action preset : The level of ambient sound is adjusted depending on the movement of the user. However, if the headset is set to Ambient Sound Control, the effects of noise cancelling may seem weak.

#TURN OFF ADAPTIVE SOUND CONTROL UPDATE#

ASC stands for Adaptive Sound Control.Īdaptive Sound Control automatically changes the headphones sound settings depending on 4 motion options: sitting, walking, running and transport.įollowing a software update of your headset, Adaptive Sound Control on the Headphones Connect app may turn ON automatically and enable the Ambient Sound Control setting. When installing SONY | Headphones Connect for the first time, you are prompted to enable the ASC setting. SONY | Headphones Connect mobile app & Adaptive Sound Control (ASC)

Let’s see how it allows you to optimise your listening experience!

Want to reduce or increase Noise Cancellation levels? Interested in playing around with Ambient sound or Noise cancellation? Sony’s Headphones Connect app features Adaptive Sound Control. Check the Applicable Products and Categories section of this article for supported models. Select the on the right side of the Status screen.IMPORTANT: Only selective models support Adaptive Sound Control.If Adaptive Sound Control is on, the effects of noise canceling may become weak. Make sure that Adaptive Sound Control is turned offĬheck the Adaptive Sound Control settings on the Sony | Headphones Connect app. Rotating it while lighly pulling up the upper part of your ear makes it easier to insert.Slightly twist the headphones to slide the earbud deep into your ear.Make sure it is attached all the way and isn't loose. Be careful that you don't pinch the end of the earbud tip when you remove it.Select the appropriate size earbud tip that minimizes the ambient noise. Noise-canceling is ineffecive if your earbud headphones don't fit your ears properly. Change the Noise canceling settings on the Sony | Headphones Connect app.If you assign the Google Assistant feature to your headphones and you want to use only one unit, use the one with the Google Assistant feature assigned.If the contact time between the touch sensor and finger is too long, the mode switches to Quick Attention mode instead of the Noise canceling function. If your headphones don't switch to the Noise canceling function, try tapping one time quickly (about 0.3 seconds).In the default setting, tap the touch sensor to change the Ambient Sound Control function.While wearing the headphones, tap the touch sensor until you hear Noise canceling.After they are removed from the charging case, the Noise canceling function will be on.Place both earbuds in the charging case, leave them for a few seconds, and then remove them from the charging case.There are a few ways to check if Noise Canceling is On: Make sure that the Noise Canceling function is turned on IMPORTANT: The Noise canceling function is most effective for low frequency (bass) noise, such as the noise made by vehicles or air conditioning, but not all sounds can be completely canceled.

Turn off adaptive sound control